Ancillaries

Our ancillaries’ page lists the associated chemicals that add to the service use of our safety-grip, conformable and aqua-safe range of antislip grip tape. We always recommend the use of the products below to help with the service life of our antislip grip tape.

Primer

Our primer is ideal for sealing porous surfaces such as wood, concrete or stone prior to application of our antislip; it also greatly helps to create an extra bond on other surfaces. The normal tin size is 1 litre which covers approximately 5m², it is simply brushed into place, for larger applications we can also offer 5L and 25L tins which offer substantial cost savings.

If you require MSDS data for this product please contact us

Edge fix

Small edge fix tube for our antislipEdge fix greatly helps to prevent the lifting of the safety-grip™ antislip in high traffic areas. One simply applies the sealant down the side of the tape using the narrow nozzle built into the tube, it helps to secure the product and extend its life. A 140ml tube will cover approximately 35 linear metres, for larger quantities we can offer an automated pressure pot system. A pressure pot system is a method of applying the edge fix with rapid production line speed, all it requires is a compressed air line to be in place, Panda Products will then supply the pot chamber and the applicator, the pressure pot system enables huge material cost savings compared to 140ml tubes. Only a very small amount is required for bonding the edges of our grip tape.

If you require MSDS data for this product please contact us

IPA cleaner

1 litre bottle of IPA used for grip tapeTo effectively clean surfaces before our grip tape is applied we recommend our IPA cleaner, it helps to remove contaminants, it does not leave behind a greasy residue unlike methylated spirits, petrol etc. Available in 1 litre bottle, this provides substantial cleaning as only a very small amount is required.

If you require MSDS data for this product please contact us